SL-800 / SL-1600 HIGH POWER BRIDGEABLE STEREO AMP  





  Sonological power amplifiers are intended for high-power sound amplification and reinforcement. They are designed to deliver solid low-frequency "punch" in combination with clean uncolored sound across the entire audio spectrum. They may be used with 4 or 8-ohm speakers in stereo or bridged mono modes. All amplifier models are housed in heavy reinforced-steel cases with large "ears" for mounting in industry-standard 19" racks. The "ears" also serve to protect the front and rear panels from damage during transport. A thick black finish keeps these amps looking good even in harsh environments.

Not only can these amplifiers hold their own on the road but they are also entirely capable of delivering studio-quality audio. Their superior design allows them to deliver an outstanding signal-noise ratio in excess of 100dB, distortion of less than .05%, and incredibly flat frequency response for uncolored sound. To ensure maximum signal isolation each channel is routed through a completely independent signal passageway. A massive toroidal transformer reduces magnetic fields and eliminates potential hum.

Every amplifier is packed with thoughtful features you're sure to appreciate including: dual phono- and binding-post outputs, 20-segment multi-colored level indicators, clipping, temperature, and drift indicators and even a novel internal crossover through which signals can be routed to isolate sounds below 200Hz for use with a subwoofer. Of course, protection and cooling of amplifiers this size is always a concern. Here again, these amplifiers are engineered to keep their composure with a full range of protective features incljuding temp, short and drift. The powerful gain elements are cooled by forced air which is filtered and drawn through a cooling tunnel across a dual-heatsink array. If you are looking for an amplifier offering clean high-power sound and versatile features at an affordable price your search has ended.

FEATURES:
* Outstanding Performance Specifications
* Balanced and Unbalanced Inputs
* Dual Phono & Binding-Post Outputs
* Bridgeable
* Built-In Crossover
* Heavy Steel Chassis
* Durable Jet-Black Finish
* 2 10-Segment Multi-Color LED Indicators
* Heat, Drift & Clip Indicators
* Delayed Startup Protection
* Overload, Over-Temp and Short Protection
* Fits in Standard Rack
* Internal Forced-Air Cooling
* Washable Air Filter

SPECIFICATIONS:

MAX OUTPUT:
8-OHM STEREO POWER: SL-800 2x220w, SL-1600 2x420w
4-OHM STEREO POWER: SL-800 2x400w, SL-1600 2x800w
8-OHM BRIDGED POWER: SL-800 800w, SL-1600 1600w
FREQUENCY RESPONSE: 20Hz-20kHz +/-0.2 dB
THD DISTORTION: less than 0.05%
S/N RATION: >=100dB
DAMPENING FACTOR: >500:1 (@1KHz/8ohm)
SLEW RATE: >=30V/us
INPUT CONNECT: (2) XLR-F / (2) phono
INPUT IMPEDANCE: balanced 10K 0dB
INPUT IMPEDANCE: unbalanced 10K +4dB
SPEAKER CONNECT: phono and binding posts
ON-BOARD CROSSOVER FREQUENCY: 200Hz
CROSSOVER ROUTING CONNECTORS: phono in & out
LEVEL INDICATORS: 20-segment LED
WARNING INDICATORS: Temp, Drift & Clip
POWER REQUIREMENTS: 110-120 VAC
DIMENSIONS: 19"L x 18.5"W x 5.1"H (483x470x130mm)
WEIGHT: SL-800 - 41.3 lbs. (18.75kg), SL-1600 55.6 lbs. (25.2kg)
 


  SL-800 Power Amp 800-Watt Bridgeable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.95
SL-1600 Power Amp 1600-Watt Bridgeable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .$549.95